fits make: Ford. year: 2013–2022.

( Manufacturer Part Number: CV6Z-9D289-E ), ( Part Type: Line ), ( Genuine Oem: Yes ), ( Manufacturer Warranty: 1 Year ), ( Universal Fitment: Direct Replacement ), ( Year: 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 ), ( Parts Included: Only Part Reference 9 On The Diagram Is Included ), ( Replaces Part Number: Cv6z-9d289-a )
The **Ford CV6Z-9D289-E Purge Line** is a precision-engineered component designed specifically for Ford vehicles equipped with OBD-II (On-Board Diagnostics) systems, serving as a critical conduit within the evaporative emissions control system. This high-quality, heat-resistant hose is crafted from durable, flexible **EPDM (Ethylene Propylene Diene Monomer) rubber**, ensuring long-lasting performance even under the demanding conditions of an engine bay. The purge line plays a vital role in the vehicle s emissions control by facilitating the flow of vaporized fuel from the fuel tank and charcoal canister to the engine s intake manifold, where it is safely combusted rather than released into the atmosphere. Engineered with a **reinforced spiral wire braid**, this hose provides exceptional resistance to kinking, crushing, and temperature fluctuations ranging from extreme cold to the high heat generated near the engine while maintaining its structural integrity over time. The **9D289-E designation** indicates its compatibility with a range of Ford models, including select versions of the **F-150, Explorer, Escape, and Mustang**, among others, ensuring seamless integration with the vehicle s factory emissions system. Whether installed during original equipment manufacturing or as a replacement for a worn or damaged line, this purge line adheres to Ford s stringent quality standards, delivering reliable performance and contributing to the vehicle s compliance with emissions regulations. Its smooth, consistent internal diameter promotes efficient airflow, reducing the risk of clogs or restrictions that could trigger check engine lights or compromise engine efficiency. For technicians and DIY enthusiasts alike, the **CV6Z-9D289-E** represents a dependable, off-the-shelf solution that upholds Ford s commitment to both performance and environmental responsibility.
### **Pros and Cons of Buying a Ford CV6Z-9D289-E Purge Line**
The **Ford CV6Z-9D289-E** is a purge line used in Ford vehicles (primarily 2000 2006 models with the 4.2L or 4.6L V6 engines) to vent evaporative emissions from the fuel system. Below is a detailed analysis of its pros and cons.
---
### **Pros**
1. **OEM Quality and Fit**
- This is an **original equipment manufacturer (OEM) replacement part**, meaning it is designed to match the exact specifications of the factory component. It ensures a proper fit without modifications, reducing the risk of leaks or improper installation.
2. **Reliability and Durability**
- Ford s aftermarket and OEM parts are generally built to last, especially when sourced from reputable suppliers. The CV6Z-9D289-E is made from durable materials (likely reinforced plastic or metal) to withstand engine heat and vacuum pressure.
3. **Prevents Emissions Failures**
- A failing purge line can cause **check engine lights (CEL)** due to evaporative emissions system (EVAP) leaks. Replacing it with a new OEM part restores proper function, preventing unnecessary repair costs and potential emissions test failures.
4. **Easy to Install**
- The purge line is a relatively simple component, typically requiring only basic tools (wrenches, pliers, and possibly a vacuum gauge for testing). Many mechanics and DIYers can replace it in under an hour.
5. **Cost-Effective Compared to Engine Replacement**
- While the part itself is inexpensive (typically **$20 $50**), ignoring a purge line failure can lead to **larger issues**, such as a failing **EVAP canister, fuel pressure regulator, or even engine damage** from prolonged fuel system issues. Replacing it early is a preventive measure.
6. **Widely Available**
- As a common Ford part, it is easy to find at **auto parts stores (AutoZone, O Reilly, RockAuto), online retailers (Amazon, eBay), or directly from Ford dealers**. Multiple suppliers ensure availability.
7. **Compatibility with Aftermarket Parts**
- If you plan to modify your vehicle (e.g., performance tuning, exhaust upgrades), an OEM purge line ensures compatibility with aftermarket components that rely on proper EVAP system function.
---
### **Cons**
1. **Potential Counterfeit or Low-Quality Replacements**
- Some aftermarket suppliers sell **knockoff or substandard parts** that may crack, leak, or fail prematurely. Buying from **unverified sellers** (especially on eBay or Amazon) increases this risk. Always check for **authentic OEM or trusted aftermarket brands** (e.g., Dorman, Bosch, or Ford Performance Parts).
2. **Misdiagnosis of the Issue**
- A failing purge line can sometimes be confused with other EVAP system problems (e.g., a clogged canister vent valve, loose hose, or vacuum leak). If the **real issue is elsewhere**, replacing just the purge line may not resolve the check engine light. A **scan tool and proper diagnosis** are essential before purchasing.
3. **Limited Lifespan in Harsh Conditions**
- While the CV6Z-9D289-E is durable, **extreme heat, road debris, or chemical exposure** (e.g., fuel spills, brake fluid leaks) can degrade the material over time. In high-mileage or performance vehicles, it may need replacement more frequently than average.
4. **Possible Installation Challenges**
- Some vehicles have **tight or hard-to-reach purge line locations**, requiring careful handling to avoid damaging surrounding components (e.g., hoses, wires, or brackets). Improper installation can lead to **leaks or improper sealing**, negating the fix.
5. **Not a Permanent Fix for Underlying Issues**
- If the **EVAP canister, purge valve, or fuel system** is failing, replacing just the purge line is a temporary solution. A **comprehensive EVAP system inspection** is recommended to avoid recurring problems.
6. **Price Variability**
- While generally affordable, prices can fluctuate based on **brand, supplier, and demand**. Some "premium" aftermarket brands may charge more without significant added value.
---
### **Conclusion**
The **Ford CV6Z-9D289-E purge line** is a **practical and cost-effective OEM replacement** for vehicles experiencing EVAP system issues. Its **reliability, ease of installation, and compatibility** make it a strong choice for both mechanics and DIYers. However, **buyers must ensure they purchase a genuine part from a trusted source** to avoid counterfeit failures. Additionally, a **proper diagnosis** is crucial to confirm that the purge line is indeed the root cause of the problem.
If you are **certain the purge line is faulty** (confirmed via **scan tool codes P0440, P0441, P0442, or P0446**) and have **ruled out other EVAP issues**, replacing it with the **CV6Z-9D289-E** is a **recommended and straightforward solution**.
---
### **Recommendation**
1. **Verify the Issue** Use an **OBD-II scanner** to confirm the purge line is the cause of the check engine light. Codes like **P0440 (EVAP system leak detected)** or **P0455 (small EVAP leak)** often point to a purge line problem.
2. **Purchase from a Trusted Source** Buy the **CV6Z-9D289-E from a reputable auto parts store (AutoZone, RockAuto, or a Ford dealer)** or a verified online retailer to avoid counterfeit parts.
3. **Inspect for Damage** Before installing, check the **old purge line for cracks, kinks, or leaks** to ensure the new one is properly replacing a faulty component.
4. **Follow Installation Best Practices**
- Use **clamp pliers** to securely attach the new line.
- Ensure **no kinks or sharp bends** that could restrict airflow.
- Test for leaks by **starting the engine and listening for hissing sounds**.
5. **Consider a Full EVAP System Check** If the issue persists after replacement, inspect the **EVAP canister, purge valve, and hoses** for additional failures.
6. **Replace with a High-Quality Aftermarket Option (If Available)** If the OEM part is difficult to find, brands like **Dorman (part # 50-9000) or Bosch** offer reliable alternatives.
**Final Verdict:** **Buy the CV6Z-9D289-E if you ve confirmed the purge line is faulty and sourced it from a trusted supplier.** It is a **simple, effective fix** for EVAP-related check engine lights in compatible Ford vehicles.
Electrical parts are not returnable. Shipping Carrier substitutions may be made at our determination in an attempt to reduce shipping cost the customer. Parts must be resalable and in the original packaging.